Pneutorque PTM-80 Series

The latest extension to the PTM tool range brings the speed advantage to the twin motor handle to higher capacity PneuTorque models.

Coupled with new gearbox designs, these new models deliver an ideal balance between robustness, speed and weight.

Fast - 2700 Nm version has a free speed of 46 rpm for rapid bolt run-down time.

Light weight - All models are fitted as standard with a light but robust aluminium reaction plate.

Other reaction styles are available for maximum versatility.

Quiet - less than 85 db(A) when under load.

Non impacting - low vibration levels make these tools safe and comfortable to use.

Square drive is quickly and easily replaced.

Bi-directional. The direction control knob is locked while the tool is running to prevent accidental damage to the gearbox. 'Soft Start' trigger control allows gradual and safe reaction location and aids socket location.
So that reaction forces are not transmitted back the operator the gearbox can rotate independently from the handle.

Dual Trigger versions reduce the risk of the operator's hands becoming trapped between the reaction bar and reaction point.

           PTM-80 with Dual Trigger Module, 2700 N·m, Bi-Directional, Stall, 1"                     PTM-80 with Right Angle Gearbox, 2700 Nm                     PTM-80-2700-B, 2700 N·m, Bi-Directional, Stall, 1"           

180296.B08.DTM -


with Dual Trigger Module

2700 Nm Bi-Directional

 Stall 1"

540.00 - 2700.00 Nm

400.00 - 2000.00 ft. lbs

180296.B08.RA -


with Right Angle Gearbox

2700 Nm

540.00 - 2700.00 Nm

400.00 - 2000.00 ft. lbs


180296.B08 -


2700 Nm Bi-Directional

Stall 1"

540.00 - 2700.00 Nm

400.00 - 2000.00 ft. lbs




Onsite same day service

Torque to Tom 0417 826 344

to you

  • Weekend Service
  • Less Downtime
  • Fast, Reliable & Affordable!


Hi – I’m Tom, How Can I Help ?



POBox 256, Aldgate, South Australia, 5154
0417 826 344 |

Tell a FriendPrintBookmark Site