PTM-72-2000-F, 2000 Nm Forward Stall 1"

PTM-72-2000-F, 2000 Nm Forward Stall 1", 295 - 1475 Nm / 400 - 2000 ft. lbs

PTM-72 tools use the same 'twin motor' handle as the PTM-52 but fitted with a durable 72mm gearbox to allow higher torque outputs. The 'twin motor' concept gives the benefit of high run-down speeds while adding very little to the size and weight of the tool.

All available as Internal and External Control, Shut-Off versions.

• Quiet - less than 85 dB(A) when under load.
• Non impacting - low vibration levels make these tools comfortable and safe to use.
• Square drive is quickly and easily replaceable.
• 'Soft Start' trigger controls / aids socket location and allows gradual and safe reaction location.
• For safety, gearbox can rotate independently from the handle so that reaction forces are not transmitted back to the operator.
• Light weight - single direction 2000 Nm stall tool weighs just 6.2 kg.
• On Bi-Directional tools, the direction control knob is locked while the tool is running to prevent accidental damage to the gearbox.
• Fast - 1000 Nm version has a free speed of 140 rpm for rapid bolt run-down.