Home > Torque Multipliers > Pneumatic Torque Multipliers > PTM Series > PneuTorque PTM-72 Series > PTM-72-2000-B-IC, 2000 Nm Bi-Directional Shutoff Internal Control 1"
PTM-72-2000-B-IC, 2000 Nm Bi-Directional Shutoff Internal Control 1"
Thumbnail

PTM-72-2000-B-IC, 2000 Nm Bi-Directional Shutoff Internal Control 1"

Item Code: 18114.B08

PTM-72-2000-B-IC, 2000 Nm Bi-Directional Shutoff Internal Control 1", 295 - 1475 Nm / 400 - 2000 ft. lbs

PTM-72 tools use the same 'twin motor' handle as the PTM-52 but fitted with a durable 72mm gearbox to allow higher torque outputs. The 'twin motor' concept gives the benefit of high run-down speeds while adding very little to the size and weight of the tool.

The integration of electronic measurement and control into the PTM-72 Series is achieved with the minimum impact on overall tool size and weight. The actual applied torque is accurately measured at the output of the tool meaning that a repeatability of ±2% can be guaranteed.

Shut-Off, Internal Control tools include a torque transducer, easy to read LED display, control panel and a solenoid valve to shut off the air supply once the desired torque has been reached.

  • Quiet - less than 85 dB(A) when under load.
  • Non impacting - low vibration levels make these tools comfortable and safe to use.
  • Square drive is quickly and easily replaceable.
  • 'Soft Start' trigger controls / aids socket location and allows gradual and safe reaction location.
  • For safety, gearbox can rotate independently from the handle so that reaction forces are not transmitted back to the operator.
  • Light weight - single direction 2000 Nm stall tool weighs just 6.2 kg.
  • On Bi-Directional tools, the direction control knob is locked while the tool is running to prevent accidental damage to the gearbox.