PTM-72-1000-B-EC, 1000 Nm Bi-Directional Shutoff Internal Control 3/4"
PTM-72-1000-B-EC, 1000 Nm Bi-Directional Shutoff Internal Control 3/4", 200 - 1000 Nm / 147 - 738 ft. lbs
PTM-72 tools use the same 'twin motor' handles as the PTM-52 but fitted with a durable 72mm gearbox to allow higher torque outputs. The 'twin motor' concept gives the benefit of high run-down speeds while adding very little to the size and weight of the tool.
The integration of electronic torque measurement and control into the PTM-72 Series is achieved with the minimum impact on overall tool size and weight. The actual applied torque is accurately measured at the output of the tool meaning that a repeatability of ±2% can be guaranteed.
Shut-Off, External Control tools incorporate a transducer, solenoid valve and three coloured LEDs for the indication of low, within tolerance or high results. However, all control functions and torque display are housed in an external controller unit (purchased separately).
- Quiet - less than 85 dB(A) when under load.
- Non impacting - low vibration levels make these tools comfortable and safe to use.
- Square drive is quickly and easily replaceable.
- 'Soft Start' trigger controls / aids socket location and allows gradual and safe reaction location.
- For safety, gearbox can rotate independently from the handle so that reaction forces are not transmitted back to the operator.
- Light weight - single direction 2000 Nm stall tool weighs just 6.2 kg.
- On Bi-Directional tools, the direction control knob is locked while the tool is running to prevent accidental damage to the gearbox.
- 1" square drive available for the 1000 Nm version, Part No. 18492.