PTM-72-1000, 1000 Nm Bi-Directional 3/4"

PTM-72-1000, 1000 Nm Bi-Directional 3/4"

Item Code: 18102.B06.RA

PTM-72-1000, 1000 Nm Bi-Directional 3/4", 200 - 1000 Nm / 147 - 738 ft. lbs

PTM-72 tools use the same 'twin motor' handle as the PTM-52 but fitted with a durable 72mm gearbox to allow higher torque outputs. The 'twin motor' concept gives the benefit of high run-down speeds while adding very little to the size and weight of the tool.

The Right Angle Gearbox enables the benefits of Norbar's electronic torque tools to be brought to a host of applications from which they are currently excluded due to space restrictions.

Also available as Internal and External Control, Shut-Off versions.

  • Allows more comfortable operation of the PTM on vertically bolting applications at chest height and above as the pistol grip is presented correctly to the operator
  • The tool handle can rotate 360° in relation to the Right Angle Gearbox allowing the most comfortable and safest position to be found
  • Quiet - less than 85 dB(A) when under load.
  • Non impacting - low vibration levels make these tools comfortable and safe to use.
  • Square drive is quickly and easily replaceable.
  • 'Soft Start' trigger controls / aids socket location and allows gradual and safe reaction location.
  • For safety, gearbox can rotate independently from the handle so that reaction forces are not transmitted back to the operator.
  • Light weight - single direction 2000 Nm stall tool weighs just 6.2 kg.
  • On Bi-Directional tools, the direction control knob is locked while the tool is running to prevent accidental damage to the gearbox.
  • Fast - 1000 Nm version has a free speed of 140 rpm for rapid bolt run-down.
  • 1" square drive available for the 1000 Nm version, Part No. 18492.